Safety Data Sheet

1. IDENTIFICATION

Product identifier: PEAK BRAE 68

Product codes: PEAK BRAE 68, 20 Litres — PKISM068020; 205 Litres — PKISM068205

Recommended use: Machinery lubricant.

Manufacturer: Peak Lubricants Pty Ltd

Manufacturer address: 224–230 South Gippsland Highway, Dandenong South, Victoria 3175

Manufacturer telephone: (03) 9799 0977

Australian supplier / distributor: Intermach Pty Ltd

Intermach address: 14 Northern Avenue, Moorabbin Airport VIC 3194

Intermach telephone: (03) 9132 5223

Intermach email: sales@intermach.com.au

Emergency telephone: (03) 9799 0977 — manufacturer emergency number stated in the source SDS

2. HAZARDS IDENTIFICATION

Based on the supplied SDS, the material is not classified as hazardous according to Safe Work Australia GHS 7 criteria.

GHS classification: No hazardous classification stated in the supplied SDS.

Signal word: None.

Hazard pictograms: None.

Hazard statements: None stated.

Precautionary statements: General safe handling and storage precautions apply.

Poison Schedule: Not Applicable.

Dangerous goods: Not classified as Dangerous Goods under the Australian Code for the Transport of Dangerous Goods by Road
& Rail or NZS5433.

Storage: Classified as C2 combustible liquid for storage and handling under AS 1940. State and territory storage requirements must
be observed

3. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients determined to be Non-Hazardous — 100%.

The supplied SDS does not disclose individual ingredient identities or concentrations beyond the statement above

4. FIRST AID MEASURES

Inhalation: Remove victim from exposure. Remove contaminated clothing and loosen remaining clothing. Keep warm and at rest.
Seek medical advice if effects persist.

Skin contact: Remove contaminated clothing and flush skin and hair with running water. Seek medical assistance if swelling,
redness, blistering or irritation occurs.

Eye contact: Wash out immediately with water. Seek medical advice as a sensible precaution.

Ingestion: Rinse mouth with water. Do NOT induce vomiting. Give a glass of water. Never give anything by mouth to an
unconscious person. Seek medical advice.

First-aid PPE: Safety shoes, overalls, gloves, apron and safety glasses. Nitrile rubber gloves are suggested for intermittent contact,
subject to local assessment.

Poison Information: Australia 131 126; New Zealand 0800 764 766.

Advice to physician: Treat symptomatically.

5. FIRE FIGHTING MEASURES

Suitable extinguishing media: Water fog/fine spray, alcohol-resistant foam, standard foam, dry agent, carbon dioxide or drychemical powder.

Specific hazards: Combustible liquid. Burning or decomposition may emit toxic fumes.

Fire-fighting protective equipment: Self-contained breathing apparatus and suitable protective clothing where exposure to vapouror combustion/decomposition products is possible.

Hazchem Code: Not applicable.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions: Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours, mist oraerosols.

Small spills: Wipe up with absorbent material and place in properly labelled containers or drums for disposal.

Large spills: Clear unprotected personnel. Work upwind or increase ventilation. Contain the spill and prevent run-off into drains andwaterways. Use soil, sand or other inert absorbent. Notify local emergency services if crops, sewers or waterways are contaminated.

Environmental precaution: Prevent entry into drains and waterways.

7. HANDLING AND STORAGE

Handling: Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of vapour, mist or aerosols.

Storage: Store in a cool, dry, well-ventilated place away from direct sunlight, foodstuffs, incompatible materials, heat and ignition
sources. Keep containers upright and closed when not in use. Check regularly for leaks.

Storage classification: C2 combustible liquid in accordance with AS 1940. Refer to applicable state and territory requirements.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Occupational exposure limit: No value assigned for this specific material by Safe Work Australia in the supplied SDS.

Engineering controls: Natural ventilation should be adequate under normal use conditions.

PPE: Safety shoes, overalls, gloves, apron and safety glasses. PPE must be suitable for the work and hazards identified by theworkplace risk assessment.

Hygiene: Do not eat, drink or smoke while using. Wash hands before eating, drinking or smoking. Avoid contact with clothing, eyesand prolonged skin contact. Avoid inhalation of vapour, mist or aerosols. Ensure eyewash and safety shower facilities are accessiblewhere required.

9. PHYSICAL AND CHEMICAL PROPERTIES

Typical values only — consult the specification sheet. N Av = Not available; N App = Not applicable.

10. STABILITY AND REACTIVITY

Reactivity / chemical stability: Thermally stable when stored and used as directed.

Conditions to avoid: Elevated temperatures and sources of ignition.

Incompatible materials: Oxidising agents.

Hazardous decomposition products: Oxides of carbon and nitrogen, smoke and other toxic fumes.

Hazardous reactions: No known hazardous reactions.

11. TOXICOLOGICAL INFORMATION

General: No adverse health effects are expected if the product is handled in accordance with this SDS and the product label.

Inhalation: May irritate mucous membranes and respiratory tract.

Skin contact: May result in irritation.Ingestion: May result in nausea, vomiting and irritation of the gastrointestinal tract.

Eye contact: May be an eye irritant.

Acute toxicity: The supplied SDS classifies the material as not hazardous for acute inhalation, dermal or ingestion exposure;estimated acute toxicity values exceed the thresholds stated in the source SDS.

Corrosion/irritancy: Not classified as corrosive or irritating to eyes or skin in the supplied SDS.

Sensitisation: Not classified as a respiratory or skin sensitiser.

Aspiration hazard: Not classified as an aspiration hazard.

Specific target organ toxicity: Not classified as a specific hazard from single or repeat exposure.

Chronic toxicity: Not classified as mutagenic, carcinogenic or reproductively toxic.

12. ECOLOGICAL INFORMATION

General: Avoid contaminating waterways.

Acute aquatic hazard: Classified as not hazardous for acute aquatic exposure; estimate >100 mg/L.

Long-term aquatic hazard: Classified as not hazardous for chronic aquatic exposure based on the supplied SDS.

Ecotoxicity / persistence / degradability / bioaccumulation / mobility: No information available in the supplied SDS.

13. DISPOSAL CONSIDERATIONS

Use appropriate PPE when disposing, recycling or reclaiming the product. Where possible, recycle material and container.Otherwise dispose of in accordance with applicable local, regional, national and international regulations.

14. TRANSPORT INFORMATION

Road and rail: Not classified as Dangerous Goods under the Australian Code for the Transport of Dangerous Goods by Road &Rail or NZS5433.

Marine: Not classified as Dangerous Goods under the IMDG Code.

Air: Not classified as Dangerous Goods under IATA Dangerous Goods Regulations.

15. REGULATORY INFORMATION

GHS: This document is structured for Australian GHS 7 workplace chemical information. The supplied SDS states the product is notclassified as hazardous under Safe Work Australia GHS 7 criteria.

SUSMP: Not Applicable.

AICIS: The supplied SDS states formulations where all components are AICS listed.

International conventions: The supplied SDS states that the material is not subject to the Montreal Protocol, StockholmConvention, Rotterdam Convention, Basel Convention or MARPOL.

16. OTHER INFORMATION

Source SDS: PEAK BRAE 68, Reference PKISM068, Peak Lubricants Pty Ltd, Version 2.0, issued 18 April 2022.

Intermach document revision: 01 — Australian distributor/customer presentation.

Document preparation date: 13 August 2026.

Next source-SDS review milestone: 18 April 2027, being five years from the source SDS issue date, unless the manufacturerrevises the SDS earlier or new information requires an earlier update.

Basis and limitation: This document reformats and presents the supplied manufacturer SDS information for Intermach distribution. It does not independently establish or alter the product's chemical composition, classification, transport status or physical-propertydata. Any change to formulation, product identity, hazard information or manufacturer SDS requires this document to be reviewedand updated before further supply.